Вопрос прост - смарт из рейда могу снять только фирменной утилитой контроллера в таком вот виде. Как привести его к человеческому ?
Extra Drive Info (Controller ID 0 - Port 3) Drive Type SATA Serial # 9SF03773 Firmware SN04 Drive Ports 0 Drive Connections 1 Interface Type -- Reallocated Sectors 37 Power On Hour 35232 Temperature 31°C (87°F) Spindle Speed 7200 RPM Queuing Supported Yes Queuing Enabled Yes Link Supported 1.5 Gbps Link Enabled 1.5 Gbps
I have extracted the following data from your 512-byte SMART block. Each attribute appears to be represented by 12 bytes. Raw values occupy 6 bytes, with least significant first (little endian format).
Byte 1 = attribute number Byte 2 = attribute type Byte 3 = ??? Byte 4 = current normalised value Byte 5 = worst normalised value Byte 6 = least significant byte of raw value... Byte 11 = most significant byte of raw value Byte 12 = ??
Таким образом смарт надо разбить по 12 байт, выходит примерно так